DISASSEMBLY AND ASSEMBLY IDLER DISASSEMBLY AND ASSEMBLY OF IDLER ASSEMBLY SPECIAL TOOLS 8. Sling idler (7) and pull it out of shaft and support assembly (10). a When hanging the idler with sling rope [2], prevent sling rope [2] from opening with wires or ropes [3]. 9. Remove floating seals (11) and (12) from idler (7). DISASSEMBLY 1. Remove the oil filler plug and drain the oil. 6 Idler: 0.33 – 0.37 l 2. Set idler (1) to a block. 3. Remove the spring seat mounting bolts and plate (2). a Record the number of the removed shims. 4. Remove support mounting bolts (3). a Record the number of the removed shims. 5. Remove nut (4) and drive out bolt (5) from the nut side. 10.
Remove floating seal (13) from shaft and support assembly (10). 6. Using push puller [1], pull support (8) out of idler (7). 7. Remove floating seal (9) from support (8). D85EX-15 30-129 (2) Symbol Part No. Necessity Part name Q'ty New/Remodel Sketch L 1 791-530-1510 In staller t 1 2 791-601-1000 O il pump t 1