DISASSEMBLY AND ASSEMBLY CARRIER ROLLER DISASSEMBLY AND ASSEMBLY OF CARRIER ROLLER ASSEMBLY SPECIAL TOOLS 7. Remove outer race (7) of the bearing from car- rier roller (6). 8. Using puller [4], remove collar (8) and bearing inner race (9) together from shaft (11). 2 791-601-1000 Oil pump t 1 DISASSEMBLY 1. Remove the oil filler plug and drain the oil. 6 Idler: 0.47 – 0.53 l 2. Set carrier roller assembly (1) on a block [1]. 3. Remove the mounting bolts, cover (2), and O- ring. 9. Remove floating seal (10) from collar (8). 4. Remove ring (3). 10. Using push tool [5], remove ring (12) from shaft (11). 5. Using tool [2], remove nut (4). 11. Remove floating seal (13) from ring (12). 6.
Using puller [3], remove the fitted part of the bearing. Then, using eyebolts, remove bearing (5) and carrier roller (6) together. 30-144 D85EX-15 (2) Symbol Part No. Part name Necessity Q'ty New/Remodel Sketch 1 791-651-1510 Installer t 1