DISASSEMBLY AND ASSEMBLY EQUALIZER BAR 8. Using tool [3], pull out center pin (10). [*4] INSTALLATION 9. Lower and remove equalizer bar (13) by operat- ing jack [2]. Carry out installation in the reverse order to removal. 4 Equalizer bar assembly: D85EX-15; 158 kg D85PX-15; 204 kg [*1] 3 Mounting bolt: 319 – 608 Nm {32.5 – 62 kgm} [*2] k When aligning the pin holes, never insert your fingers in them. a Before installing the side pin, adjust the hanging height on the track frame to align the hole of the equalizer bar with the hole on the track frame side. a Direct the grease hole of the pin forward. 2 Equalizer bar side bushing: Grease (G2-LI) 3 Mounting bolt:
54 – 123 Nm {5.5 – 12.5 kgm} [*3] 3 Mounting bolt: 147 – 309 Nm {15 – 31.5 kgm} [*4] k When aligning the pin holes, never insert your fingers in them. a Before installing the center pin, adjust the jack [2] to align the hole of the equalizer bar with the hole on the track frame side. 2 Equalizer bar bushing and main frame bushing: Grease (G2-LI) D85EX-15 30-171 (2)