STRUCTURE, FUNCTION AND MAINTENANCE STANDARD HYDRAULIC, HSS PUMP 2. Control of discharge amount If swash plate angle becomes larger, the differ- ence between volumes E and F becomes larger, and oil discharge Q is incleased. Swash plate angle is changed by servo piston (6) Servo piston (6) carrise out reciprocal movement in a straight line ( ) according to the command from the servo valve single pressure. This straight line movement is trasmitted to rocker cam (4) through rod (7), and rocker cam (4), which is supported on the cylindrical surface by creadle (3) rotates on the cylindrical surface.
The area receiving the pressure is different at the left and right sides of servo piston (6), and the receiving pressure at the small diameter piston end is always connected with main pump dis- charge pressure (self pressure) PP . Output pressure PNC of the servo valve is applied to the chamber receiving the pressure at the large diameter piston end (which receives pressure of the pump). The movement of servo piston (6) is controlled by the relationship of the size of pump pressure PP and the pressure at the large diameter piston end, and the comparative size of the ratio of area receiving the pressure at the large diameter pis- ton end and small diameter piston end. D85EX-15 10-47