STRUCTURE, FUNCTION AND MAINTENANCE STANDARD HYDRAULIC, HSS PUMP Operation 1. Operation of pump Cylinder block (9) rotates toghther with shaft (1), and shoe (5) slides on plane A . When this happens, rocker cam (4) moves along cylindrical surface B , so angle of center line X of arocker cam (4) to the axial direction of cylin- der block (9) changes. This angle is called the swash plate angle. When center line X of rocker cam (4) is the same as the axial direction of cylinder block (9) (swash plate angle = 0), the difference between volumes E' and F' indside cylinder block (9) is 0, so pump does not suction and discharge, and no pumping's carried out.
Actually swash plate angle does not become 0.) The swash plate angle is proportional to pump discharge volume. With swash plate angle formed by the angle between center line X of rocker cam (4) to the axial direction of cylinder block (9), plane A acts as a cam for shoe (5). In this way, piston (8) slides inside cylinder block (9), and as a result, a difference is generated between volumes E and F inside the cylinder block. The amount of suction and discharge is equal to difference F E . In other words, cylinder block (9) rotates, and the volume of chamber E becomes smaller, so oil is discharged during this process.
At the same time, the volume of chamber F becomes larger and oil is sucked in this process. 10-46 D85EX-15