Komatsu — ASSEMBLY

DISASSEMBLY AND ASSEMBLY WORK EQUIPMENT CONTROL VALVE DISASSEMBLY AND ASSEMBLY OF WORK EQUIPMENT CONTROL VALVE ASSEMBLY a Only the precautions for assembling the work equipment control valve assembly are described in this section. a For the tightening torque of each part, see STRUCTURE AND OPERATION, Maintenance standard. ASSEMBLY a Clean the all parts and check them for dirt or damage. Coat their sliding surfaces with engine oil before installing. a When assembling the suction valve, check that the spring is installed normally in the sleeve.

a When assembling a relief valve or a plug, check that the cut part of the backup ring is closed and apply grease (G2-LI) to the periphery of the backup ring. a After installing the main relief valve assembly, adjust it, referring to TESTING AND ADJUST- ING, Testing adjusting work equipment hydraulic pressure. D85EX-15 30-177 (2)