DISASSEMBLY AND ASSEMBLY HYDRAULIC CYLINDER Blade lift cylinder 1) Install retainer (17) and sleeve (18). 2) Install piston assembly (15) to piston rod (16), and then install sleeve (14) and collar (13). 3) Using tool U3 , tighten nut (12) onto the cylin- der. 4. Piston rod assembly Blade lift and ripper lift cylinder 1) Set cylinder (9) to tool U1 . 2) Insert piston rod assembly (8) in cylinder (9). a Push in the piston rod to the stroke end. 2 Sealing part: Grease (G2-LI) 2 Piston rod: Adhesive (LT-2) 3) Using a hydraulic pump or a power wrench, install head assembly (7) to the cylinder with tool U2 . 3 Mounting nut: 2.16 ± 0.22 kNm {220 ± 22 kgm} 3 Head assembly: Blade lift cylinder:
785 ± 78.5 Nm {80 ± 8.3 kgm} Ripper lift cylinder: 1.03 ± 0.10 Nm {105 ± 10.5 kgm} Blade tilt and ripper lift cylinders 1) Set piston rod assembly (23) to tool U1 . 2) Install piston assembly (25) to piston rod (23). 3) Using tool U3 , tighten nut (24) onto the cylin- der. 2 Piston rod: Adhesive (LT-2) Blade tilt cylinder 1) Set cylinder (12) to tool U1 . 2) Insert piston rod assembly (11) in cylinder (12). a Push in the piston rod to the stroke end. 3 Mounting nut: Blade tilt cylinder: 5.20 ± 0.52 kNm {530 ± 53 kgm} Ripper lift cylinder : 3.97 ± 0.40 kNm {405 ± 40.5 kgm} 2 Sealing part: Grease (G2-LI) 3) Tighten the mounting bolts of head assembly (10). 3 Head assembly:
250 ± 0.25 Nm {25.5 ± 2.5 kgm} 30-182 D85EX-15 (2)