DISASSEMBLY AND ASSEMBLY OPERATOR'S CAB GLASS (STUCK GLASS) a If adhesive (13) is projected from the trim seals (4) of stuck door window glasses on both sides, remove it with rubber spat- ula [9]. 9. Fix the window glasses. 1) Using styrene foam blocks [10] and rubber bands [11], fix the front window glass to fit it completely. a You may use sealing tapes to fix the front window glass. 3) Fill the clearance between each door window glass and trim in the range of dimension (k). i) Mask the range of dimension (k) of each door window glass. ii) Fill clearance (m) between each door window glass (2) and trim seal (4) with caulking material.
a The usable period of the following caulk- ing material is 6 months after the date of manufacture. Do not use the caulking material after its usable period. a Apply the caulking material to joint (c) of the trim seal, too. (The figure shows the operator's cab of a hydraulic excavator.) 2 Caulking material: SEKISUI SILICONE SEALANT D85EX-15 30-201 (2)