Komatsu — INSTALLATION

DISASSEMBLY AND ASSEMBLY OPERATOR'S CAB GLASS (STUCK GLASS) 3) Mask front window glass (1) and operator's cab (7) with masking tapes [8]. 4) Fill the clearance between front window glass (1) and operator's cab (7) with caulking material (14) all around the window. 2 Caulking material: SEKISUI SILICONE SEALANT a The usable period of the following caulk- ing material is 6 months after the date of manufacture. Do not use the caulking material after its usable period. 8. Install both door window glasses. 1) Using tool X1 , match both door window glasses (2) to lines (e) on positioning tapes [6] drawn in step 5 and install them to both doors (9).

a Since the window glass cannot be removed and stuck again, stick it very carefully. a Stick the glass within 5 minutes after applying the adhesive. 2) After sticking each window glass, press all around it until it is stuck to the both-sided adhesive tape. a Press the corners of each window glass firmly. 5) After applying caulking material (14) to front window glass (1), form it with the fingers as shown in the following figure. a Use rubber spatula [9] to form the caulk- ing material around the handrail, etc. where it is difficult to form with the fin- gers. 30-200 D85EX-15 (2)