DISASSEMBLY AND ASSEMBLY OPERATOR'S CAB GLASS (STUCK GLASS) 4) Remove release tape of the both-sided adhesive tape (3a) on the glass side. a Apply adhesive (13) to dimensions (h) and (j) of both-sided adhesive tape (3) of operator's cab (7). Dimension (h): 10 mm Dimension (j) : 15 mm a Apply adhesive (13) higher than both-sided adhesive tape (3). a Apply the adhesive evenly. 5) Apply adhesive (13) to the outside of both- sided adhesive tape (3) of the operator's cab. 7. Install the front window glass. 1) Using tool X1 , match front window glass (1) to line (e) on positioning tapes [6] drawn in step 5 and install it to operator's cab (7).
a Since the window glass cannot be removed and stuck again, stick it very carefully. a Stick the glass within 5 minutes after applying the adhesive. 2) After sticking the window glass, press all around it until it is stuck to the both-sided adhesive tape. a Press the corners of the window glass firmly. D85EX-15 30-199 (2)