Komatsu — REMOVAL AND INSTALLATION

DISASSEMBLY AND ASSEMBLY ENGINE CONTROLLER REMOVAL AND INSTALLATION OF ENGINE CONTROLLER ASSEMBLY REMOVAL 4. Disconnect wiring connectors EGC1 (4), EGC2 (5), and EGC3 (6) and remove engine controller assembly (3). [*1] a Each wiring connector is installed with 1 hexagon socket head screw on its back side. k Disconnect the cable from the negative (–) ter- minal of the battery. 1. Remove operator's seat assembly (1). 4 Operator's seat assembly: 68 kg 2. Remove left side cover (2). INSTALLATION Carry out installation in the reverse order to removal.

a For the method of changing the fuel injection amount adjustment after the engine assembly or engine controller is replaced, ask your Komatsu distributor. [*1] 3 Mounting screw: 2.82 Nm {0.288 kgm} 3. Remove the 4 mounting bolts and take out engine controller assembly (3). 30-208 D85EX-15 (2)