Komatsu — REMOVAL AND INSTALLATION

DISASSEMBLY AND ASSEMBLY STEERING AND TRANSMISSION CONTROLLER REMOVAL AND INSTALLATION OF STEERING AND TRANSMISSION CONTROLLER REMOVAL 4. Disconnect wiring connectors STC1 (3), STC2 (4), and STC3 (5) and remove steering and transmission controller assembly (2). [*1] a Each wiring connector is installed with 1 hexagon socket head screw on its back side. k Disconnect the cable from the negative (–) ter- minal of the battery. 1. Remove the engine controller assembly. For details, see REMOVAL OF ENGINE CONTROL- LER ASSEMBLY. 2. Remove engine controller assembly mounting plate (1). INSTALLATION Carry out installation in the reverse order to removal. 3.

Remove the 4 mounting bolts and take out steer- ing and transmission controller assembly (2). [*1] 3 Mounting screw: 2.82 Nm {0.288 kgm} D85EX-15 30-209 (2)