Komatsu D155AX-6 — TRANSMISSION

SEN00604-00 10 Structure, function and maintenance standard Unit: mm Disc clutch Structure Operation When clutch is “engaged“ (fixed) q The disc clutch consists of piston (2), plates (3), discs (4), pin (5), return spring (6) etc. to fix ring gear (1). q The oil from ECMV is sent with pressure to the rear side of piston (2) through oil the passage of housing (7) and pushes piston (2) leftward. q Inside teeth of disc (4) are engaged with out- side teeth of ring gear (1). q Piston (2) contacts plate (3) closely against disc (4) to stop rotation of disc (4) by use of the friction force generated between them. q Plate (3) is assembled to clutch housing (7) with pin (5).

q Since inside teeth of disc (4) are engaged with outside teeth of ring gear (1), move of ring gear (1) is stopped. 34 D155AX-6 No. Check item Criteria Remedy 18 Wear of the 1st car- Width rier seal ring (large) Thickness Standard size Tolerance Replace Width 4.0 -0.01 -0.04 ickness 4.0 ±0.15 19 Wear of the 1st car- rier seal ring (small) Th Width 4.0 -0.01 -0.04 ickness 5.0 ±0.15 20 Backlash between 3 sun gear and planetary pinion R, F, rd, 1st 2nd 21 Backlash between planetary pinion and ring gear R F, 2nd, 1st 3rd