Komatsu D155AX-6 — TRANSMISSION

10 Structure, function and maintenance standard SEN00604-00 When clutch is “disengaged“ (released) Oil passage in speed clutch a The figure shows the case in which “1st“ gear speed is selected. q As the oil from ECMV is stopped, piston (2) is pushed back rightward by return spring (6). q The friction force between plates (3) and discs (4) is released and ring gear (1) is released. q When the steering/directional/gear shift lever is set in the “neutral“ position, the 1st, 2nd, or 3rd speed is selected. q The piston chamber of the clutch correspond- ing to the selected gear speed is filled with oil by electronically controlling the hydraulic circuit of each clutch.

q When the steering/directional/gear shift lever is shifted from the “neutral“ position to the“for- ward“ or “reverse“ position, the pump is required to supply oil of quantity to fill the pis- ton chamber of the F clutch or R clutch. q When the gear speed is changed from “for- ward 1st“ to “forward 2nd“, the pump is required to supply oil of only quantity to fit the plate and disc of the 2nd clutch together since the F clutch has been filled with the oil. q The time lag in the gear shifting operation is reduced by controlling the oil in the clutch cir- cuit as explained above. D155AX-6 35