SEN00605-00 10 Structure, function and maintenance standard Operation of piston motor Principle q Supposed that the axis of the disc is supported and the disc can rotate freely.If force (F) is applied to the disc diagonally, force (F) is divided into vertical force to the disc (F1) and circumferential force (F2). (F1) pushes the disc to axis direction, and (F2) rotates the disc clockwise. Operation q The pressurized oil sent from the main piston pump enters from the piston motor inlet port, and the oil pressure is applied to the back of piston (3), and drive shaft (1) rotates by the inclination (Q) of piston (3) and cylinder block (4).
q Instead, if force (F'), not force (F) is applied to the disc, the force is also divided into (F1') and (F2'), and the disc rotates counterclockwise by force (F2'). Structure q Seven pistons (3) are attached to the disc part of drive shaft (1) with a manner just like a spherical joint Pistons (3) forms an specific agle with drive shaft (1), and stored in cylinder block (4). 8 D155AX-6