10 Structure, function and maintenance standard SEN00605-00 Brake valve q The brake valve consists of check valve (9), counterbalance valve (8), and safety valve (11). Operation when pressurized oil is supplied q If steering lever is operated, the pressurized oil from the control valve is supplied to port (PA). q Functions and operations of respective compo- nents shall conform to the following. q It pushes open check valve (9A), and flows from motor inlet port (MA) to motor outlet port (MB). 1) Counterbalance valve and check valve q The outlet port side of the motor is closed by check valve (9B) and spool (8), so the pres- sure at the side where the oil is being supplied rises.
Function q When the steering is operated on a downhill slope, the gravity force tends to make the cur- rent driving speed faster than the speed by motor (engine) rotation. q If the steering is operated while the engine is running at low speed, the motor rotates under no load and runs away. This may cause an extremely dangerous condition. q These valves control the steering opration in accordance with the engine speed (pump delivery) in order to prevent such a dangerous condition. D155AX-6 9