SEN00605-00 10 Structure, function and maintenance standard q The pressurized oil at the side where the oil is being supplied flows from orifice (E1) of spool (8) into chamber (S1). Brake operation when traveling downhill q When steering is operated on a downhill slopes, if the machine attempts to run away, the motor will rotate under no load, and the oil pressure at the inlet port of motor will drop. q When the pressure in chamber (S1) becomes higher than the spool switching pressure, spool (8) is pushed to the right. q Through orifice (E1), the pressure in chamber (S1) drops. q Port (MB) and port (PB) are connected, open- ing the motor outlet port side and starting the motor rotating.
q If the pressure in chamber (S1) drops below the spool switching pressure, spool (8) is pushed to the left by spring (13), (14), and out- let port (MB) is throttled. q The pressure at the outlet port side rises, gen- erating rotation resistance on the motor to pre- vents the machine from running away. q Spool (8) moves to a position where it bal- ances the pressure at outlet port (MB) with the force resulting from the weight of the machine and the pressure at the inlet port. q In this way, it throttles the outlet port circuit and possible to steer to a speed that matches the amount of oil discharged from the pump. 10 D155AX-6