SEN00605-00 10 Structure, function and maintenance standard 2) Action for the direction of maximizing the pump delivery q When the difference between pump discharge pressure (PP) and LS pressure (PLS), in other words, LS differential pressure ( PLS) becomes smaller [for example, when the area of opening of the control valve becomes larger and pump discharge pressure (PP) drops], spool (6) is pushed to the left by the combined force of LS pressure (PLS) and the force of spring (4). q When spool (6) moves, port (D) and port (E) are interconnected and connected to the PC valve.
q The PC valve is connected to the drain port, so the pressure across circuits (D) and (K) becomes drain pressure (PT). (The operation of the PC valve is explained later.) q The pressure at the large piston diameter end of servo piston (10) becomes drain pressure (PT), and pump discharge pressure (PP) always enters the small diameter end port (J), so servo piston (10) is pushed to the left, and moves the swash plate in the direction to make the delivery larger. 22 D155AX-6