SEN00605-00 10 Structure, function and maintenance standard Operation 1) When pump controller is normal (1) When the load on the actuator is small and pump discharge pressure (PP) is low Action of PC-EPC valve solenoid (1) q Command current (X) is being sent to PC-EPC valve solenoid (1) from the pump controller. q This command current (X) works on PC-EPC valve and output the signal pressure to changes the force of pushing piston (2). q Spool (3) stops at a position where the com- bined force pushing spool (3) by the spring set pressure of spring (4) and pump discharge pressure (PP) is balanced.
q The pressure [port (C) pressure] output from PC valve is changed depending on the above position. 26 D155AX-6