10 Structure, function and maintenance standard SEN00605-00 2. PC valve PA: Pump port PA2: Pump pressure pilot port PDP: Drain port PM: Mode selector pressure pilot port PPL: Control pressure output port (to LS valve) 1. Wiring 2. Cover 3. Seat 4. Retainer 5. Spool 6. Pin 7. Servo piston assembly 8. Plug Function q When the pump discharge pressure (PP) is high, the PC valve controls the pump so that no more oil than the constant flow (in accor- dance with the discharge pressure) flows even if the stroke of the control valve becomes larger. It carries out equal horsepower control so that the horsepower absorbed by the pump does not exceed the engine horsepower.
q If the load during the operation becomes larger and the pump discharge pressure (PP) rises, it reduces the delivery from the pump. q If the pump discharge pressure drops, it increases the delivery from the pump. q In this case the relationship between pump dis- charge pressure (PP) and pump delivery (Q) with the electric current value (X) given to PC- EPC valve solenoid as the parameter is shown in the diagram. D155AX-6 25