10 Structure, function and maintenance standard SEN00605-00 q Port (C) of the PC valve is connected to port (E) of the LS valve. q Pump discharge pressure (PP) is applied to the small piston diameter end of servo piston (9), port (A) and port (B). q When pump discharge pressure (PP) is small, spool (3) is on the left. q Ports (C) and (D) are connected, and the pres- sure entering the LS valve becomes drain pressure (PT). q If port (E) and port (G) of the LS valve are con- nected, the pressure entering the large diame- ter end of the piston from port (J) becomes drain pressure (PT), and servo piston (9) moves to the left side. q The pump delivery will be set to the increasing trend.
q Spring (4) extends as servo piston (9) moves and weakens the spring force. q As the spring force is weakened, spool (3) moves to the right, the connecting between port (C) and port (D) is shut off and the pump discharge pressure ports (B) and (C) are con- nected. q The pressure on port (C) rises and the pres- sure on the large diameter end of the piston also rises. Thus, the leftward move of servo piston (9) is stopped. q The stop position for servo piston (9) [ = pump delivery] is decided at the point where the force of spring (4) and the pushing force of PC-EPC valve by solenoid and the pushing force cre- ated by pressure (PP) acting on spool (3) are in balance. D155AX-6 29