Komatsu D155AX-6 — BRAKE ECMV

10 Structure, function and maintenance standard SEN00605-00 When the PCCS lever is “operated to the left halfway“, brake pedal is “released“, and parking brake lever is in “free“ position: Gradual left turn (L.H. brake is “half released“, R.H. brake is “released“, parking brake is “released“) q When the PCCS lever is in “operated to the left halfway“ position and the brake pedal is “released“, proportional solenoid (1) of the brake ECMV is energized and pushes ball (2) to the left and closes the sealing part. q Accordingly, if the stroke of the PCCS lever is short, the oil pressure after port (A) is set high and the brake is turned from “released“ to “half released“.

If the stroke of the PCCS lever is long, the oil pressure after port (A) is set low and the brake is turned from “half released“ to “applied“. q The oil in port (P) of the brake ECMV flows in chamber (B) and pushes valve (3) to the left.As for the oil pressure after port (A), the controller outputs the command current to proportional solenoid (1) according to the stroke of the PCCS lever. q When the parking brake lever is set in the “free“ position, the pilot pressure of brake ECMV port (S) remains, because the parking brake solenoid valve is de-energized. q Proportional solenoid (1) generates the propul- sion force in proportion to the command cur- rent.

This propulsion force is balanced with the sum of the propulsion force generated by the oil pressure in the back pressure port of the brake piston and the tension of spring (4), then the brake pressure is set up to adjust the brake force. D155AX-6 61