SEN00605-00 10 Structure, function and maintenance standard When the PCCS lever is in “neutral“, brake pedal is “depressed“, and parking brake lever is in “free“ position: Stop (L.H. and R.H. brake are “operated“, parking brake is “released“) q When the brake pedal is depressed, propor- tional solenoids (1) of L.H. and R.H. brake ECMV are de-energized to open the sealing part of ball (2). q The controller outputs the command current to proportional solenoids (1) according to the brake pedal stroke. q Proportional solenoid (1) generates the propul- sion force in proportion to the command cur- rent.
This propulsion force is balanced with the sum of the propulsion force generated by the oil pressure in the back pressure port of the brake piston and the tension of spring (4), then the brake pressure is set up to adjust the brake force. q When the brake pedal is depressed fully, the brake pedal switch is turned “ON“, and the parking brake solenoid valve is energized to drain the pilot pressure of the brake ECMV port (S).This carries out the same function as when the parking brake lever is set at the “lock“ posi- tion. 62 D155AX-6