SEN00607-00 10 Structure, function and maintenance standard 3. From the circulating condition of lowering blade to the blade tensed condition q Lowering blade (Stroke of lever is more than 70%.) q QDV mode: ON Operation q The lift cylinder bottom is connected to the cir- cuit between port (PB) and port (VB), this enables the blade to be tensed under no circu- lating condition. q Under the circulating condition of blade lower- ing, if the blade gets tensed, the lift cylinder bottom pressure rises. q If the lift cylinder bottom pressure becomes 3.43 MPa {35kg/cm 2 } or more, selector valve spool (2) moves to the left.
q The pilot pressure from the EPC valve is blocked and pressure chamber (a) of main spool (1) is connected to drain circuit (TS). q Main spool (1) moves to the right by the force of spring (3). 60 D155AX-6