Komatsu D155AX-6 — STANDARD VALUE TABLE FOR ENGINE

SEN00678-01 20 Standard value table Standard service value table 1 Standard value table for engine 1 2 D155AX-6 Machine model D155AX-6 Engine SAA6D140E-5 Cate- gory Item Measurement condition Unit Standard value for new machine Service limit value Engine Speed • Engine coolant temperature: Within operating range High idle rpm 2,100 (0/-50) 2,100 (0/-50) Low idle rpm 740 (+20/0) 740 (+20/0) Rated speed rpm 1,900 1,900 Intake air pressure (Boost pressure) • Engine coolant temperature: Within operating range • Power train oil temperature: Within operating range • Torque converter: Stalled kPa {mmHg} Min. 117 {Min. 880} 100 {750} Exhaust temperature • Whole speed range (Outside temperature:

20°C) °C 660 700 Exhaust gas color • Engine coolant temperature: Within operating range At sharp acceleration % (Bosch index) Max. 25 (Max. 2.5) 35 {3.5} High idle (Bosch index) Max. 1.0 2.0 Valve clearance • Normal temperature Intake valve mm 0.35 — Exhaust valve mm 0.57 — Compression pressure • Engine oil temperature: 40 – 60°C Compression pressure MPa {kg/cm2} Min. 4.1 {Min. 42} 2.8 {29} Engine speed rpm 200 – 250 200 – 250 Blow-by pressure • Engine coolant temperature: Within operating range • Power train oil temperature: Within operating range • Torque converter: Stalled kPa {mmH2O} Max. 2.94 {Max.

300} 3.92 {400} Engine oil pressure • SAE0W30EOS, SAE5W40EOS, SAE10W30DH, SAE15W40DH SAE30DH Oil • Engine oil temperature: Min. 80 °C High idle MPa {kg/cm2} Min. 0.34 {Min. 3.5} 0.21 {2.1} Low idle MPa {kg/cm2} Min. 0.10 {Min. 1.0} 0.08 {0.8} Oil temperature • Whole speed range (In oil pan) °C 90 – 110 120 Alternator belt tension • Between water pump pulley – alternator pulley • Deflection under finger pressure of 98 N {10 kg} mm 13 – 16 13 – 16 Air compressor belt tension • Between compressor pulley – fan pulley • Deflection under finger pressure of 59 N {6 kg} mm Approx. 10 Approx. 10