Komatsu D155AX-6 — MEASURING ENGINE OIL PRESSURE

30 Testing and adjusting SEN00679-01 Measuring engine oil pressure 1 4. Run the engine at low idle and high idle and measure the engine oil pressure. a Measuring instruments for engine oil pressure k Stop the machine on level ground, lower the work equipment to the ground, stop the engine, and set the parking brake lever and work equipment lock lever in the lock posi- tion. a Measure the engine oil pressure under the fol- lowing condition. q Engine coolant temperature: Within oper- ating range 5. After finishing measurement, remove the mea- suring instruments and return the removed parts. 1. Open the engine left side cover and left mud- guard. 2.

Remove engine oil pressure pickup plug (1) from the cylinder block. 3. Install nipples [1] and [2] of hydraulic tester G1 and connect them to hydraulic tester G2 . a Since the size of the plug hole is R1/4, quick nipples (799-101-5210) may be used instead of nipples [1] and [2]. D155AX-6 15 Symbol Part No. Part name G 1 799-101-5002 Hydraulic tester 790-261-1204 Digital hydraulic tester 2 799-401-2320 Hydraulic tester