30 Testing and adjusting SEN00680-01 9. Measuring steering right brake pressure (RB) 1) Connect oil pressure gauge [1] of hydrau- lic tester M to oil pressure pickup plug (9). a When using an analog oil pressure gauge, use one of 5.9 MPa {60 kg/ cmІ}. 10. Measuring steering left brake pressure (LB) 1) Connect oil pressure gauge [1] of hydrau- lic tester M to oil pressure pickup plug (10). a When using an analog oil pressure gauge, use one of 5.9 MPa {60 kg/ cmІ}. 2) Start the engine and set the parking brake lever in the FREE position. 3) While running the engine at low idle and high idle, measure the right brake pres- sure.
a During measurement, check that the oil pressure lowers to 0 when the brake pedal is pressed or the parking brake lever is set in the LOCK posi- tion. 2) Start the engine and set the parking brake lever in the FREE position. 3) While running the engine at low idle and high idle, measure the left brake pressure. a During measurement, check that the oil pressure lowers to 0 when the brake pedal is pressed or the parking brake lever is set in the LOCK posi- tion. 4) After finishing measurement, remove the measuring instruments and return the removed parts. 4) After finishing measurement, remove the measuring instruments and return the removed parts. D155AX-6 9