Komatsu D155AX-6 — ADJUSTING BRAKE PEDAL

30 Testing and adjusting SEN00680-01 Adjusting brake pedal 1 a Adjusting tool for brake pedal k Stop the machine on level ground, lower the work equipment to the ground, stop the engine, and set the parking brake lever and work equipment lock lever in the LOCK position. a Tighten the locknut of the rod securely and bend the cotter pin securely. a When adjusting the brake pedal, remove the left cover of the dashboard and left foot rest as a unit. 2) Adjust installed dimension (b) of stopper (2) so that dimension (a) will be 80 mm. 1. Adjusting brake potentiometer 1) Turn the starting switch ON and set the machine monitor to Adjusting function of the service mode. a Adjustment code:

0005 (Brake pedal potentiometer initial cor- rection) a For the operating method, see "Spe- cial functions of machine monitor (EMMS)". q Dimension (b) = 35.5 mm (Reference value) 3) Adjust installed dimension (b) of stopper (2) so that the brake pedal potentiometer voltage will be the specified voltage when brake pedal (1) is released. q Brake pedal voltage: 2,500 ± 50 mV 4) Referring to "Special functions of machine monitor (EMMS), Service mode 07, Adjust- ment (Adjustment ID: 0005 )", perform initial correction of the brake pedal potentiome- ter. D155AX-6 13 Symbol Part No. Part name N 79A-264-0091 Push-pull scale