SEN00680-01 30 Testing and adjusting 6. Testing and adjusting open lock (stopper rubber) a Check the relationship between the opera- tor's cab and door (stopper rubber) while the door is locked open. If there is any fault, adjust the open lock. 1) Lock the door open and move it in the for- ward and reverse directions to check that it does not have play. a Check both sides, 2 places on each side. 2) Check that the operating effort of the unlock lever is not large. 3) Loosen the locknut of stopper rubber (12) (upper one). 4) Loosen the locknut of stopper rubber (13) (lower one). 5) Adjust the height of stopper rubbers (12) and (13) according to the trouble.
a If there is play, project (heighten) the stopper rubber until the play is elimi- nated. a If the door is not locked easily or the unlock lever is heavy, return (lower) the stopper rubber in the range that the door does not have play. 6) While fixing stopper rubbers (12) and (13), tighten the locknuts. 40 D155AX-6