30 Testing and adjusting SEN00680-01 5) Open and close door (5) and check that it is locked and unlocked smoothly. a If the door is not locked or unlocked smoothly (the operating effort of the knob is large), repeat adjustment from the first. a Operating effort of door knob: 49 ± 19.6 N {5 ± 2 kg} 6) Apply grease to latch (8). a If the latch dries up, the operating effort of the knob is increased. Accordingly, apply sufficient grease to the latch. 2) Check that striker (10) is not leaning against or from center (g) of latch (11). 3) Check that striker (10) is aligned with cen- ter (h) of latch (11). q Normal: Quantity of misalignment is 0.5 mm or less. 2 Latch:
Grease (G2-LI) 4) Loosen the mounting bolts of striker (10). 5) While setting striker (10) upright, tighten the mounting bolts. 5. Testing and adjusting open lock (latch and striker) a Check the relationship between the opera- tor's cab and door (latch and striker) while the door is locked open. If there is any fault, adjust the open lock. 1) Check the relationship between the open lock latch and striker from the direction of B . a Move the door in the opening direc- tion and check the engagement of the latch and striker. D155AX-6 39