SEN00681-01 30 Testing and adjusting t Ordinary functions and special functions of machine monitor The machine monitor has the ordinary functions and special functions and displays information of various types on the multi-display. Some items are displayed automatically according to the internal setting of the machine monitor and the oth- ers are displayed according to the operation of the switches. 1. Ordinary functions: Operator mode The items in this mode are displayed ordinarily. The operator can display and set them by operating the switches (Display and setting of some items need special operations of the switches). 2. Special functions:
Service mode The items in this mode are not displayed ordinarily. Each serviceman can display them by operating the switches specially. This mode is used for special setting, testing, adjusting, or troubleshooting. o Special operations O (Special operations) a Classification of operator mode A: Display/Function from time when starting switch is turned ON to time when screen changes to ordi- nary screen and display after starting switch is turned OFF B: Display/Function when switch of machine monitor is operated C: Display/Function when certain condition is satisfied D:
Display/Function which needs special operation of switch 4 D155AX-6 Operator mode (Outline) Page 5 p A Display of KOMATSU logo 5 p A Display of screen to input password 6 p A Display of check before starting 6 p A Display of warning after check before starting 6 p A Display of ending of maintenance interval 6 p A Display of check of preset 7 p A Display of ordinary screen 7 p A Display of end screen 7 p B Selection of operation mode 7 p B Selection of gearshift mode 8 p B Customizing operation 8 p B Operation of customize memory 8 p B Selection of float mode 8 p B Operation to cancel alarm buzzer 8 p B Operation of air conditioner/heater 9 p B Selection of dual tilt (Dual tilt specification) 9 p B Operation to display camera mode (if camera is installed) 10 p B Operation to display clock and service meter 10 p B Check of maintenance information 11 p B Setting and display of user mode (including KOMTRAX messages for user) 11 p C Display of caution monitor 12 p C Display of action code and failure code 12 p Service mode Page 16 p 01 Monitoring 17 p 02 Abnormal- ity Record Mechanical system "Abnormality Record" 24 p Electrical system "Abnormality Record" 25 p Air conditioner "Abnormality Record"/ Heater "Abnormality Record" 35 p 03 Maintenance Record 36 p 04 Maintenance Mode Change 37 p 05 Phone Number Entry 39 p 06 Default Key-on Mode 40 p Setting of unit 41 p Setting of maintenance password 42 p Setting of camera 43 p Setting of ECO display 44 p 07 Adjustment 45 p 08 PM CLINIC 71 p 09 Cylinder Cut-Out 72 p 10 No Injection 73 p 11 Fuel Consumption 74 p 12 KOMTRAX Settings Terminal Status 75 p GPS & Communication Status 76 p Modem S/N 77 p 13 Service Message 78 p D Function of checking display of LCD (Liquid Crystal Display) 14 p D Function of checking service meter 14 p D Function of changing maintenance password 15 p