30 Testing and adjusting SEN00681-01 t Operator mode (Outline) a Only outline of the operator mode is described in this section. For details of contents/opera- tion of each function/display, see "the Struc- ture, function and maintenance standard, or Operation and Maintenance Manual". a The following are the displays or functions of the operator mode explained in this section (including some items which need special operations). a Display pattern of operator mode The contents of display from the time when starting switch is turned ON to the time when screen changes to ordinary screen depends on the setting and condition of the machine. a: When engine start lock is set effective b:
When engine start lock is set ineffective c: When there is abnormal item in check- before-starting items d: When there is maintenance item which is not maintained after specified interval Display of KOMATSU logo When the starting switch is turned ON, the KOMATSU logo is displayed for 2 seconds. After the KOMATSU logo is displayed for 2 sec- onds, the screen changes to "Display of screen to input password" or "Display of check before start- ing". a The following screen may be displayed instead of the above "Display of screen to input pass- word screen". a If this screen is displayed, call the person responsible to operation of KOMTRAX in your Komatsu distributor and ask for remedy.
O (Special operations) Function of checking display of LCD (Liquid Crystal Dis- play) Function of checking service meter Function of changing maintenance password D155AX-6 5 Display pattern a b c d Display of KOMATSU logo 1 1 1 1 Display of screen to input password 2 – – – Display of check before starting 3 2 2 2 Display of warning after check before starting – – 3 – Display of ending of maintenance inter- val – – – 3 Display of check of preset 4 4 4 4 Display of ordinary screen 5 4 5 5 Display of end screen Selection of operation mode Selection of gearshift mode Customizing operation Operation of customize memory Selection of float mode Operation to cancel alarm buzzer Operation of air conditioner/heater Selection of dual tilt (Dual tilt specification) Operation to display camera mode (if camera is installed) Operation to display clock and service meter Check of maintenance information Setting and display of user mode (including KOMTRAX messages for user) Display of caution monitor Display of action code and failure code