Komatsu D155AX-6 — SPECIAL FUNCTIONS OF MACHINE MONITOR (EMMS)

30 Testing and adjusting SEN00681-01 Function of changing maintenance password When changing the maintenance password used for the maintenance setting function, follow these procedures. a Set a new password of 4 – 6 digits (If it has only 3 or less digits or has 7 or more digits, it is not accepted). q [F5]: Delete input numeral/Return to ordi- nary screen 1. While the ordinary screen is displayed, perform the following operation with the numeral input switches. q [F6]: Confirm input numeral q Operation of switches (While pressing [4], perform the operation in order):

[4] + [5] o [5] o [5] a This operation of the switches is not ac- cepted until 10 minutes pass after the starting switch is turned on. 4. After the "New Password" screen is displayed again, input a new password again with the numeral input switches and confirm it with the function switch. q [F5]: Delete input numeral/Return to ordi- nary screen q [F6]: Confirm input numeral a If a password different from the password input before is input, the message to input again is displayed. 2. After the "Password" screen is displayed, input the current password with the numeral input switches and confirm it with the function switch. q [F5]: Delete input numeral/Return to ordi- nary screen q [F6]:

Confirm input numeral a Default password: [000000] a If the input password is correct, the screen changes to the next screen. a If the input password is incorrect, the mes- sage to input the password again is dis- played. 5. If the screen to notify completion of setting is displayed and then the ordinary screen is dis- played, the password is changed successfully. 3. After the "New Password" screen is displayed, input a new password with the numeral input switches and confirm it with the function switch. D155AX-6 15