SEN00681-01 30 Testing and adjusting a The following figure shows the screen displayed when the items are deleted one by one (which is a little different from the screen displayed when all the items are deleted together). 2) Check that the screen is set in the delete mode, and then delete the items one by one or together with the function switches. a If the screen is set in the delete mode, [CLEAR] graphic mark is indicated at [F2]. 4) If the screen to notify completion of dele- tion is displayed and then the "Electrical Sys. Error Reset" (delete mode) screen is displayed, the deletion of the "Abnormality Record" is completed. a After a while, the screen returns to the "Electrical Sys.
Error Reset" screen. q [F2]: Delete all items q [F3]: Move to lower item q [F4]: Move to upper item q [F5]: Return to "Abnormality Record" screen q [F6]: Delete selected item a To delete items one by one: Select the item to be deleted with [F3] or [F4] and press [F6]. a To delete all items together: Press [F2], and all the items are deleted, regardless of selection of the items. a If [E] is displayed on the left of a fail- ure code, the deleting operation is accepted but the information is not deleted. 3) After the "Electrical Sys. Error Reset" screen is displayed, operate the function switches. q [F5]: Return to "Electrical Sys. Error Reset" screen (Delete mode) q [F6]:
Execute deletion 26 D155AX-6