SEN00681-01 30 Testing and adjusting Maintenance Record The machine monitor records the maintenance information of the filters, oils, etc., which the opera- tor can display and check by the following opera- tions. When maintenance is carried out, if the data are reset in the operator mode, the number of the times of maintenance is recorded in this section. 01 Engine Oil Change 02 Eng Oil Filter Change 03 Fuel Main Filter Change 41 Fuel Pre Filter Change 04 Hyd Oil Filter Change 06 Corrosion Resistor Change 1. Selecting menu Select "03 Maintenance Record" on the "Ser- vice Menu" screen.
07 Check and addition of damper case oil 08 Replacement interval of final drive case oil 10 Replacement of hydraulic oil 19 Replacement of power train oil 20 Replacement of power train oil filter 3. Items displayed on Maintenance Record screen The following items are displayed. (a): Maintenance items (b): Number of times of change up to now (c): Service meter reading (SMR) at previous change 2. Selecting maintenance record item After the "Maintenance Record" screen is dis- played, select an item to be checked with the function switches or numeral input switches. q [F1]: Move to next page (screen) q [F2]: Move to previous page (screen) q [F3]: Move to lower item q [F4]:
Move to upper item q [F5]: Return to service menu screen a You may enter a 2-digit code with the numeral input switches to select the item of that code. a The following items can be selected in the maintenance record. 36 D155AX-6