Komatsu D155AX-6 — SPECIAL FUNCTIONS OF MACHINE MONITOR (EMMS)

30 Testing and adjusting SEN00681-01 "Abnormality Record" (Air conditioner "Abnor- mality Record"/Heater "Abnormality Record") The machine monitor classifies and records the abnormality which occurred in the past or which are occurring at present into the mechanical system abnormality, electrical system abnormality, and air conditioner abnormality or heater abnormality. To check the air conditioner "Abnormality Record" or heater "Abnormality Record", perform the follow- ing procedures. a All the following figures show the air condi- tioner specification. 3.

Information displayed on "Abnormality Record" screen On the air conditioner "Abnormality Record" or heater "Abnormality Record" screen, the fol- lowing information is displayed. (a): System/Component name (b): Number of occurrence time (c): Condition (Normal or abnormal) q [F2]: Delete "Abnormality Record" q [F5]: Return to "Abnormality Record" screen a If [E] is displayed on the left of a condition, the abnormality is still occurring or reset- ting of it has not been confirmed. a If "CAN Status" is displayed in Communi- cation condition, communication cannot be carried out normally. Accordingly, the conditions of other items are turned OFF. 1.

Selecting menu Select "02 Abnormality Record" on the Service menu screen. 2. Selecting sub menu After the "Abnormality Record" screen is dis- played, select "03 Air-conditioning System" or "03 Heater Abnormality Record" with the func- tion switches or numeral input switches. 4. Deleting "Abnormality Record" While the "Abnormality Record" screen is dis- played, press [F2], and the number of occur- rence time of fault is deleted. If it is confirmed at this time that the abnormality has been reset, the display changes to Normal. q [F3]: Move to lower record q [F4]: Move to upper record q [F5]: Return to service menu screen q [F6]:

Confirm selection a You may enter a 2-digit code with the numeral input switches to select the record of that code and confirm it with [F6]. a Heater specification In the heater specification, the display of "Air conditioner" is replaced with "Heater" and the items which are not related to the heater are not displayed. D155AX-6 35