Komatsu D155AX-6 — SPECIAL FUNCTIONS OF MACHINE MONITOR (EMMS)

30 Testing and adjusting SEN00681-01 Default setting (Setting of camera) Check or change various settings related to the machine monitor and machine by default setting. The camera setting function is used to set default setting and removal of a camera. q [F3]: Move to left item q [F4]: Move to right item q [F5]: Cancel setting before confirmation and return to Default screen q [F6]: Confirm selection in each line a After "Camera" screen is displayed, cam- era 1 can be always set. When 2 or more cameras are connected, if camera 1 is set, the screen changes to setting of camera 2 automatically.

a After confirming the setting of each line with [F6], return to the Default screen with [F5], and the setting is effective. a If a camera is connected but not set nor- mally with this function, the graphic mark of camera is not displayed at [F3] in the operator mode. Accordingly, the image of the camera cannot be used. a If 2 or more cameras are connected, be sure to set the use of them from camera 1 in order. a The function of displaying 2 images simul- taneously is effective when use of camera 1 and camera 2 is set. a When a camera is installed, check that the displayed image is not inverted horizon- tally in the operator mode. 1.

Selecting menu Select "06 Default" on the "Service Menu" screen. 2. Selecting sub menu After the "Default" screen is displayed, select "04 Camera" with the function switches or numeral input switches. a Select this item similarly to an item on the "Service Menu" screen. 3. Selecting camera setting After the "Camera" screen is displayed, select the setting with the function switches. q OFF: Camera is not connected q Original image: Image of connected cam- era is displayed in original position (as in mirror, used as back monitor) q Reverse image: Image of connected cam- era is displayed in reverse position (as seen directly, used as front or side moni- tor) D155AX-6 43