SEN00681-01 30 Testing and adjusting Adjustment ID: 1012 (Steering lever neutral posi- tion adjustment) Adjustment ID: 1013 (Steering lever leftmost posi- tion adjustment) q This adjustment code is used to make the power train controller recognize the neutral position of the steering potentiometer of the PCCS lever. a After the power train controller or PCCS lever is replaced, be sure to carry out this adjust- ment once. q This adjustment code is used to make the power train controller recognize the leftmost position of the steering potentiometer of the PCCS lever. a After the power train controller or PCCS lever is replaced, be sure to carry out this adjust- ment once.
q Functions of function switches [F3]: Unused [F4]: Unused [F5]: Return to adjustment item selecting screen (ID inputting screen) [F6]: Save adjustment value q Functions of function switches [F3]: Unused [F4]: Unused [F5]: Return to adjustment item selecting screen (ID inputting screen) [F6]: Save adjustment value q Operating method: 1) Check that the PCCS lever is in the neu- tral position of the steering direction and keep it in that position. 2) Press [F6] and check that the alarm buzzer sounds. a Even if the adjustment is carried out, the displayed value does not change. a Even if this adjustment code is turned off, the adjustment is effective.
a This adjustment code is used to make the controller recognize the neutral position of the potentiometer. It is not used to adjust the steering force. q Operating method: 1) Operate the PCCS lever to the left stroke end of the steering direction and keep it in that position. 2) Press [F6] and check that the alarm buzzer sounds. a Even if the adjustment is carried out, the displayed value does not change. a Even if this adjustment code is turned off, the adjustment is effective. a This adjustment code is used to make the controller recognize the leftmost position of the potentiometer. It is not used to adjust the steering force. 52 D155AX-6