SEN00681-01 30 Testing and adjusting Adjustment ID: 6001 (R1 reverse slow set speed) a Even if this adjustment code is turned off, the adjustment is effective. q This adjustment code is used to adjust the engine speed applied to travel at gear speed R1 with the reverse slow mode ON. a Use this adjustment code for work when nec- essary. q Functions of function switches [F3]: Increase adjustment value [F4]: Decrease adjustment value [F5]: Return to adjustment item selecting screen (ID inputting screen) [F6]:
Save adjustment value q Information displayed on screen The speed reduced from the high idle speed (2,050 rpm) is displayed and the adjustment value is increased or decreased by 50 rpm (The value displayed on the screen is multi- plied by 1/10). a The default adjustment value is 300 rpm (Displayed value: 30). (Default setting: 2,050 – 300 = 1,850 rpm) q Operating method 1) Increase or decrease the adjustment val- ue by pressing [F3] or [F4]. 2) Press [F6] and check that the alarm buzz- er sounds. a If the engine speed has been adjusted, it is displayed. It can be adjusted again within the adjustment range, however. a It is not necessary to drive the machine during adjustment.
After finishing adjust- ment, however, drive the machine at R1 with the reverse slow mode ON and check that there is not a problem in the actual travel speed. a Even if this adjustment code is turned off, the adjustment is effective. 56 D155AX-6