SEN00681-01 30 Testing and adjusting Adjustment ID: 8021 (Blade lowering current cor- rection) Adjustment ID: 8022 (Blade raising current correc- tion (Fine control mode)) q This adjustment code is used to adjust the sen- sitivity of start of blade when the blade control lever is moved in the lowering position with the blade fine mode OFF. a Use this adjustment code for work when nec- essary. q This adjustment code is used to adjust the sen- sitivity of start of blade when the blade control lever is moved in the raising position with the blade fine mode ON. a Use this adjustment code for work when nec- essary. q Functions of function switches [F3]:
Increase adjustment value [Current offset] [F4]: Decrease adjustment value [Current offset] [F5]: Return to adjustment item selecting screen (ID inputting screen) [F6]: Save adjustment value q Functions of function switches [F3]: Increase adjustment value [Current offset] [F4]: Decrease adjustment value [Current offset] [F5]: Return to adjustment item selecting screen (ID inputting screen) [F6]: Save adjustment value q Operating method 1) Increase or decrease the adjustment val- ue by pressing [F3] or [F4]. 2) Press [F6] and check that the alarm buzz- er sounds. a If the engine speed has been adjusted, it is displayed. It can be adjusted repeat- edly, however.
a It is not necessary to move the blade dur- ing adjustment. After finishing adjust- ment, however, lower the blade and check that there is not a problem in the actual operation feel (Check with the blade fine control mode OFF). a Even if this adjustment code is turned off, the adjustment is effective. q Operating method 1) Increase or decrease the adjustment val- ue by pressing [F3] or [F4]. 2) Press [F6] and check that the alarm buzz- er sounds. a If the engine speed has been adjusted, it is displayed. It can be adjusted repeat- edly, however. a It is not necessary to move the blade dur- ing adjustment.
After finishing adjust- ment, however, raise the blade and check that there is not a problem in the actual operation feel (Check with the blade fine control mode ON). a Even if this adjustment code is turned off, the adjustment is effective. 66 D155AX-6