SEN00681-01 30 Testing and adjusting Adjustment ID: 8025 (Blade tilting right current cor- rection) Adjustment ID: 9995 (Control brake release mode) q This adjustment code is used to adjust the sen- sitivity of start of blade when the blade control lever is moved in the tilting right position. a Use this adjustment code for work when nec- essary. q This adjustment code is used to release the control brake (right and left brake ECMV) to check the operation of the backup brake (brake pedal solenoid valve). a Use this adjustment code for testing, adjusting, or troubleshooting when necessary. q Functions of function switches [F3]: Increase adjustment value [Current offset] [F4]:
Decrease adjustment value [Current offset] [F5]: Return to adjustment item selecting screen (ID inputting screen) [F6]: Save adjustment value q Functions of function switches [F3]: Unused [F4]: Unused [F5]: Return to adjustment item selecting screen (ID inputting screen) [F6]: Unused q Operating method 1) Increase or decrease the adjustment val- ue by pressing [F3] or [F4]. 2) Press [F6] and check that the alarm buzz- er sounds. a If the engine speed has been adjusted, it is displayed. It can be adjusted repeat- edly, however. a It is not necessary to move the blade dur- ing adjustment.
After finishing adjust- ment, however, tilt the blade to the right and check that there is not a problem in the actual operation feel. a Even if this adjustment code is turned off, the adjustment is effective. q Operating method When this adjustment code is displayed, its function is effective and the control brake (right and left brake ECMV) is kept released. a After this adjustment code is turned OFF, its function is ineffective. 68 D155AX-6