Komatsu D155AX-6 — FAILURE CODE [CA323] INJ #5 (L#5) OPEN/SHORT ERROR

40 Troubleshooting SEN00717-01 Failure code [CA323] Inj #5 (L#5) Open/Short Error 1 Circuit diagram related to injector #5 D155AX-6 45 Action code Failure code Trouble Inj #5 (L#5) Open/Short Error (Engine controller system) E03 CA323 Contents of trouble • There is disconnection or short circuit in injector #5 circuit. Action of controller • None in particular. Problem tha appears on machine t • Output drops. • Rotation is unstable.

Related information Possible caus and standar value in norm state Cause Defective injector #5 (Inter- 1 nal trouble) Disconnection in wiring har- ness (Disconnection in wiring 2 or defective contact in con- es nector) d al Ground fault in wiring har- 3 ness (Contact with GND cir- cuit) 4 Defective engine controller Standard value in normal state/Remarks on troubleshooting Defective injector #5 (Inter- nal trouble) a Prepare with starting switch OFF, then carry out troubleshoot- ing without turning starting switch ON. CN5 (male) Resistance Between (1) – (2) 0.4 – 1.1 z Between (1), (2) – chassis ground Min.

1 Mz Disconnection in wiring har- ness (Disconnection in wiring or defective contact in con- nector) a Prepare with starting switch OFF, then carry out troubleshoot- ing without turning starting switch ON. Wiring harness between EGC1 (female) (46) – CN5 (female) (1) Resis- tance Max. 1 z Wiring harness between EGC1 (female) (60) – CN5 (female) (2) Resis- tance Max. 1 z Ground fault in wiring har- ness (Contact with GND cir- cuit) a Prepare with starting switch OFF, then carry out troubleshoot- ing without turning starting switch ON. Wiring harness between EGC1 (female) (46) – CN5 (female) (1) and chassis ground Resis- tance Min.

1 Mz Wiring harness between EGC1 (female) (60) – CN5 (female) (2) and chassis ground Resis- tance Min. 1 Mz Defective engine controller a Prepare with starting switch OFF, then carry out troubleshoot- ing without turning starting switch ON. EGC1 (female) Resistance Between (46) – (60) 0.4 – 1.1 z Between (46), (60) – chassis ground Min. 1 Mz