Komatsu D155AX-6 — FAILURE CODE [CA559] RAIL PRESS LOW ERROR

SEN00717-01 40 Troubleshooting Check sheet for rail pressure low error 66 D155AX-6 Model D155AX-6 Work No. Machine serial No. # Date of check / / Engine SAA6D140E-5 Service meter h Engine serial No. # Worker's name A. Visual check Good NG 1 Fuel leakage to outside 2 Clogging of fuel tank breather B.

Check with machine monitor (02 Fault history, 01 monitoring, and 09 reduced cylinder mode operation) Good NG 3 Check of failure code / / / / 4 Check of monitoring information Code Displayed item Checking condition ISO unit Standard value (Reference value) Measured value Good NG 01002 Engine speed Low idle r/min 715 – 765 High idle r/min 1,825 – 1,925 Torque converter stall r/min 1,560 – 1,660 31706 Final accelerator position Low idle % 0 High idle % 100 18600 Final fuel injection rate command (by weight) Torque converter stall mg/st — — — 36200 Final common rail pressure command Torque converter stall MPa — — — 36400 Common rail pres- sure Torque converter stall MPa — — — 36300 Final injection tim- ing command Low idle CA — — — High idle CA — — — Torque converter stall CA — — — 36500 Boost pressure Torque converter stall kPa — — — 04107 Engine coolant tem- perature Low idle °C — — — 14200 Fuel temperature Low idle °C — — — 5 Check of reduced cylinder mode operation (Engine speed) Setting Reduced cylinder Checking condition ISO unit Standard value (Reference value) Measured value Good NG Reduce each cylinder No.

1 cylinder r/min — — — No. 2 cylinder r/min — — — No. 3 cylinder r/min — — — No. 4 cylinder r/min — — — No. 5 cylinder r/min — — — No. 6 cylinder r/min — — —