40 Troubleshooting SEN00717-01 Note 1 : Check the low-pressure circuit parts for the following items. 1) Fuel level 2) Clogging of fuel tank breather 3) Sticking and wear of feed pump and clogging of filter 4) Leakage through and clogging of low-pressure fuel piping 5) Defective operation of bypass valve and installation of wrong part (See Fig. 1) 6) Clogging of fuel filter 7) Fuel in oil pan (Fuel leakage inside head cover) Fig. 1: Locations of overflow valve (1), bypass valve (2), and fuel inlet joint (3) Overflow valve (1): Spring is seen through both holes. Bypass valve (2): Spring is seen through hole on nut side. Fuel inlet joint (3): Gauze filter is seen through both holes. Note 2 :
Check, clean, and replace the filters and strainers according to the following procedure. 1) Gauze filter: Disassemble and check. If clogged, clean. 2) Upstream strainer of gauze filter: If the gauze filter is clogged, clean the upstream filter, too. 3) Fuel filter: If the trouble is not solved by performing 1) and 2) above, replace the fuel filter. D155AX-6 65