Komatsu D155AX-6 — FAILURE CODE [DFA7L8] BT LEVER: SIGNAL MISMATCH

40 Troubleshooting SEN00720-01 Failure code [DFA7L8] BT lever: Signal mismatch 1 D155AX-6 15 Action code Failure code Trouble BT lever: Signal mismatch (Work equipment controller system) E03 DFA7L8 Contents of trouble • In blade control lever tilt potentiometer 1 and 2 systems, total of both signal voltages is below 4.41 V or above 5.59 V. Action of controller • Continues control with signal of normal one of blade control lever tilt potentiometer 1 and 2 systems. • Limits operation of engine and transmission. Problem that appears on machine • Once machine is stopped, engine speed is limited to medium (half). • Once machine is stopped, travel is limited to F1 and R1.

Related information • State of blade control lever tilt potentiometer signal can be checked with monitoring function. (Code: 73500 Blade Tilt Lever A Potentio) (Code: 73501 Blade Tilt Lever B Potentio) • Method of reproducing failure code: Turn starting switch ON + Operate blade control lever (in tilting direction). Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting Carry out troubleshooting for failure codes [DFA8KA], [DFA8KB], [DFA9KA], and [DFA9KB].