Komatsu D155AX-6 — FAILURE CODE [DLT3KB] T/M OUT-SPEED SENSOR: ABNORMAL

40 Troubleshooting SEN00721-01 Failure code [DLT3KB] T/M out-speed sensor: Abnormal 1 Circuit diagram related to transmission bevel speed sensor D155AX-6 33 Action code Failure code Trouble T/M out-speed sensor: Abnormal (Power train controller system) E01 DLT3KB Contents of • trouble No signal is input from transmission bevel speed sensor. Action of • controller Recognizes that transmission bevel speed is 0 rpm. Problem that • appears on • machine Transmission bevel speed cannot be monitored. Traction force cannot be calculated. • Related information • Transmission bevel speed can be checked with monitoring function. (Code: 31400 T/M Out Speed) Method of reproducing failure code:

Turn starting switch ON + Drive machine (actually or with no load). 1 Possible causes and standard 2 value in normal state 3 4 Cause Standard value in normal state/Remarks on troubleshooting Defective transmission bevel speed sensor (Internal dis- connection or short circuit) a Prepare with starting switch OFF, then carry out troubleshoot- ing without turning starting switch ON. BVRV (male) Resistance Between (1) – (2) 500 – 1,000 z Between (1) – chassis ground Min. 1 Mz Disconnection in wiring har- ness (Disconnection in wiring or defective contact in con- nector) a Prepare with starting switch OFF, then carry out troubleshoot- ing without turning starting switch ON.

Wiring harness between STC2 (female) (30) R – BVRV (female) (1) t esis- ance Max. 1 z Wiring harness between STC2 (female) (29) R – BVRV (female) (2) t esis- ance Max. 1 z Ground fault in wiring har- ness (Contact with GND cir- cuit) a Prepare with starting switch OFF, then carry out troubleshoot- ing without turning starting switch ON. Wiring harness between STC2 (female) (30) R – BVRV (female) (1) and chassis ground t esis- ance Min. 1 Mz Defective power train con- troller If causes 1 – 3 are not detected, power train controller may be defective. (Since trouble is in system, troubleshooting cannot be carried out.)