Komatsu D155AX-6 — FAILURE CODE [DXHRKA] BLADE UP EPC: DISCONNECTION

SEN00722-01 40 Troubleshooting Failure code [DXHRKA] Blade up EPC: Disconnection 1 Circuit diagram related to blade lift-up EPC solenoid 30 D155AX-6 Action cod e Failure code Trouble Blade up EPC: Disconnection (Work equipment controller system) E03 DXHRKA Contents trouble of • When signal is output to blade lift-up EPC solenoid circuit, no current flows. Action of controlle • Turns signal to blade lift-up EPC solenoid circuit OFF. r • Limits operation of engine and transmission. Problem th appears o machine at • Blade cannot be lifted up. n • Once machine is stopped, engine speed is limited to medium (half). • Once machine is stopped, travel is limited to R1.

Related informatio • Output to blade lift-up EPC solenoid can be checked with monitoring function. (Code: 71001 Blade Raise EPC (F/B)) n • Method of reproducing failure code: Turn starting switch ON + Operate blade control lever (Raise).

Possible cau and standa value in nor state Cause Defective blade lift-up EPC 1 solenoid (Internal disconnec- tion) ses Disconnection in wiring har- rd ness (Disconnection in wiring mal 2 or defective contact in con- nector) Defective work equipment 3 controller Standard value in normal state/Remarks on troubleshooting Defective blade lift-up EPC olenoid (Internal disconnec- ion) a Prepare with starting switch OFF, then carry out troubleshoot- ing without turning starting switch ON.

WEP1 (male) Resistance Between (1) – (2) 4.5 – 14.5 z Disconnection in wiring har- ness (Disconnection in wiring or defective contact in con- nector) a Prepare with starting switch OFF, then carry out troubleshoot- ing without turning starting switch ON. Wiring harness between WEC3 (female) (6) – WEP1 (female) (1) Resis- Ma tance x. 1 z Wiring harness between WEC3 (female) (13) – WEP1 (female) (2) Resis- Ma tance x. 1 z Defective work equipment ontroller a Prepare with starting switch OFF, then carry out troubleshoot- ing without turning starting switch ON. WEC3 (female) Resistance Between (6) – (13) 4.5 – 14.5 z