SEN00807-01 40 Troubleshooting E-4 Preheater does not operate 1 14 D155AX-6 Trouble (1) When starting switch is turned to HEAT position, preheating monitor does not light up. Related information • Preheater monitor lights up when starting switch is turned to HEAT. • If engine coolant temperature is below -5 °C, automatic warm-up system operates and preheating monitor lights up for up to 40 seconds. Possible causes and standard value in normal state Cause Standard value in normal state/Remarks on troubleshooting 1 Defective starting switch (Internal disconnection) a Prepare with starting switch OFF, then keep starting switch OFF and turn it to HEAT and carry out troubleshooting in each case.
Starting switch Resistance Between 250 – 255 OFF Min. 1 Mz HEAT Max. 1 z 2 Disconnection in wiring har- ness (Disconnection in wiring or defective contact in con- nector) a Prepare with starting switch OFF, then carry out troubleshoot- ing without turning starting switch ON. Wiring harness between CM01 (female) (16) – terminal 255 Resis- tance Max. 1 z 3 Defective machine monitor a Prepare with starting switch OFF, then keep starting switch OFF and turn it to HEAT and carry out troubleshooting in each case. CM01 Starting switch Voltage Between (16) – chassis ground OFF Max. 1 V HEAT 20 – 30 V