Komatsu — CONTROLS ON RADIO

OPERATION Remark With each mode, the display is returned automatically to its original setting after 5 seconds. SETTING CORRECT TIME 1. Press display selector button (4) to display the time. After 5 seconds, the display will return to the frequency display and the time cannot be corrected. If this happens, press display selector button (4) again. 2. Press time adjustment button (8) to set to Hour or Minute. H button: Adjusts the hour (each time the button is pressed, the time advances by one hour) M button:

Adjusts the minute (each time the button is pressed, the time advances by one minute) If the H or M button is kept pressed, the time will advance continuously until the button is released. ADJ button: When the ADJ button is pressed, the time is reset as follows. When display is 00 - 05 minutes, time is returned to 00 min. 00 sec. (No change in hour) When display is 55 - 59 minutes, time is advanced to 00 min. 00 sec. (Hour advances) When display is 06 - 54 minutes, time cannot be reset. (Time stays same) Example -10:05 10:00 -10:59 11:00 -10:26 10:26 Use the H , M , and ADJ buttons to set to the correct time. 2-68 PC300LC/HD-7E0