OPERATION ANTENNA Before transporting the machine putting it inside a building, stored the antenna to prevent any interference. Stow the antenna as follows. 1. Loosen antenna mounting bolt(1)and store the antenna at position). 2. Tighten bolt(1). USE RADIO WITH CARE To ensure safety, always keep the sound to a level where it is possible to hear outside sounds during operation. If water gets into the speaker case or radio, it may lead to an unexpected failure, so be careful not to get water on the equipment. Do not wipe the scales or buttons with benzene, thinner, or any other solvent. Wipe with a soft dry cloth. Use a cloth soaked in alcohol if the equipment is extremely dirty.
When the battery is disconnected or replaced, settings for the preset buttons and clock are cleared, so all settings must be reprogrammed. TOOLBOX Used to keep the tools in this toolbox. This is inside of the battery box cover on the right side of the machine GREASE GUN HOLDER This is inside the door at the rear right of the machine. When not using the grease gun, store it in its holder. PC300LC/HD-7E0 2-69